Panel Management

Panel Monitoring
To monitor a display panel it must have an RS-232 (serial) port with appropriate query commands. This option is usually only available on commercial grade p...
Wed, 29 May, 2013 at 10:25 AM
Panel ON/OFF Scheduling
 To start using the panel ON/OFF scheduling, first the panel monitoring must be enabled. Follow the instructions to Setup Panel Monitoring.  Once the ...
Wed, 18 Sep, 2013 at 12:11 PM
Applying the Touch Drive to the Player
Contact Customer Support with the Touch Screen Information The right touch screen drivers need to be added to your network to match the touch screens you...
Fri, 18 Oct, 2013 at 5:17 PM
Calibrating the Touch Screen and Media Player
Calibrating the Touch Screen and Media Player After the player has received the touch drivers it will need to be calibrated with the screen it will be use...
Fri, 18 Oct, 2013 at 5:14 PM
Current Touch Screen and Media Player Supported Hardware
Touch Screen and Media Player Hardware Support Skip to end of metadata Go to start of metadata The following details the information and steps r...
Fri, 18 Oct, 2013 at 5:15 PM
Caution When Applying Touch Drivers to Players
Caution About Applying Touch Drivers to Players If you have more than one type of touch screen in your network you need to be careful identifying which pl...
Fri, 18 Oct, 2013 at 5:16 PM
Elo Touch Screen Install Guide - Models 3201L and 4201L
This document will take your through the installations steps to connect the ComQi player to the ELO screen and start the commissioning process to EnGage  ...
Wed, 5 Feb, 2014 at 11:55 AM